eeSilk Stem is a fatigue-reducing compliance stem that noticeably reduces vibrations on variable terrain. With up to 20mm of tunable compliance, an easy single bolt external elastomer change, and options with or without soft/firm Compliance Switch – the eeSilk Stem makes any road, no matter the terrain, smoother.
Highlights:
Up to 20mm of tunable shoulder and wrist-saving compliance
On the fly adjustment with optional soft/firm Compliance Switch
Introducing the new Darimo IX2 stem, the perfect stem for your mountain or road bike with a weight of just 66 grams in 100 mm length.
The stem is manufactured in a single piece from unidirectional and bidirectional carbon fabrics. It has a careful construction and lamination that allow to reduce weight maintaining vertical and torsional stiffness. The front part has an integrated cap, non-removable, with the two screws on the bottom which gives a perfect aesthetic.
Like all our products, each stem is laminated by hand, then the exact number of carbon layers with correct direction are placed at each stem point.
In combination with carbon, M4 titanium screws are used with a bigger head to prevent damages during the assembly. The small nuts are made with anodized 7075 aluminum.
• Finishes: UD Matte
• Weight limit: The Darimo stem is safe and exceeds the tests of ISO 4210-2, but it is not recommended for riders over 90 kg. Request the reinforced version if necessary.
• Uses: Road, x-cross, MTB.
• Clamping diameter: 31.8mm
• Angles: -6º, -12º, -17º y -25º
• Steering diameters: 1-1/8″ and 1-1/4″ oversize version.
• Clamping width: 46mm
• Stack height: 46mm
• Road handlebar compatibility: Darimo Ellipse. Not compatible with aero handlebar (wider at top zone)
• Materials:
– Body: Unidirectional and bidirectional carbon fibre fabrics
– Nuts: Anodized 7075 T6 aluminum
– Bolts: Ti Gr5 M4
Nexum Drag stem/handlebar unit weighs 218g (380 mm/100 mm/-6°/6° flare), which is less than most road handlebars without a stem. Thanks to the many variations, everyone will find the right setup for themselves and their bike. Titanium bolts and aluminum barrel nuts help to save even more weight and ensure reliable clamping on the steerer tube.
The stem/handlebar unit is available in different finishes and in handlebar widths of 360 mm, 380 mm, 400 mm, 420 mm or 440 mm, measured from center to center. There is a choice of stem lengths from 70 mm to 130 mm in 10 mm increments and stem angles of -6° or -12°. Darimo has also taken into account the desire for different flare variations, so the Gravel version with its flare of 16° and a flare out of a further 5° at the handlebar ends offers you a high degree of freedom of movement and plenty of safety and comfort in the drop. If you want something less, we recommend the Road versions with 0° or 6° flare. All versions on offer have a compact reach of 77 mm and 128 mm drop. The flat top link minimizes the area exposed to the wind and also allows your hands to be supported comfortably, so you can ride long distances without getting tired. Laminated guides on the underside for brake and shift cables help you to mount everything perfectly.
The stem can be clamped to the steerer tube with a maximum torque of 4 Nm. A torque of up to 4 Nm is also permitted in the clamping area of the shift/brake levers. Please approach the required torque for secure fastening and do not exceed the maximum values. We recommend using a high-quality carbon paste during assembly. The existing stem clamping surface must be at least 32 mm. Two M5 threaded bushes are laminated underneath the handlebars with a distance of 29 mm between them. At this point you can securely attach a computer holder or similar accessories.
In order to achieve the sensational weight of 218g (380 mm/100 mm/-6°), to pass the standard ISO 4210-2 test and to be able to approve the components up to 90 kg system weight, Darimo Carbon uses a specially developed lamination process. Depending on the handlebar width and stem length, the layer structure is optimally adapted.
Introducing the new Darimo IX2 stem, the perfect stem for your mountain or road bike with a weight of just 66 grams in 100 mm length.
The stem is manufactured in a single piece from unidirectional and bidirectional carbon fabrics. It has a careful construction and lamination that allow to reduce weight maintaining vertical and torsional stiffness. The front part has an integrated cap, non-removable, with the two screws on the bottom which gives a perfect aesthetic.
Like all our products, each stem is laminated by hand, then the exact number of carbon layers with correct direction are placed at each stem point.
In combination with carbon, M4 titanium screws are used with a bigger head to prevent damages during the assembly. The small nuts are made with anodized 7075 aluminum.
• Finishes: UD Matte
• Weight limit: The Darimo stem is safe and exceeds the tests of ISO 4210-2, but it is not recommended for riders over 90 kg. Request the reinforced version if necessary.
• Uses: Road, x-cross, MTB.
• Clamping diameter: 31.8mm
• Angles: -6º, -12º, -17º y -25º
• Steering diameters: 1-1/8″ and 1-1/4″ oversize version.
• Clamping width: 46mm
• Stack height: 46mm
• Road handlebar compatibility: Darimo Ellipse. Not compatible with aero handlebar (wider at top zone)
• Materials:
- Body: Unidirectional and bidirectional carbon fibre fabrics
- Nuts: Anodized 7075 T6 aluminum
- Bolts: Ti Gr5 M4
Murex stem comes from a long tradition, revised with modern eyes. It is a quill stem (22.2mm; 7/8’ diameter) for 1” threaded headset, clamp for 26mm handlebar. Features a 73-degree angle with high polished finishing.
The evolution of current Superbox to the DCR system for a full internal cable routing. One Stem 4 Ways. The stem can be used in 4 different ways to fit any cable routing solution in the market: DCR, S-DCR, Direct and External. Combined with Deda handlebars featuring the DCR system (Deda internal cable routing), the stem is the perfect solution for bicycles with full internal cable routing. The Superbox® stem features a proprietary system that provides two possible mounting solutions for the internal cable routing.
The complete internal cable routing (DCR) or the semi-internal cable routing (S-DCR) through a cover that allows the installation, adjustment or service without unnecessary complications for electronic cables and hydraulic housing disconnection. Superbox® works with 1-1/8” standard fork steerer, the stem is compatible with a 46mm (for 1-1/8” bearing) or 56mm (for 1.5” bearing) upper headtube. The stem package includes special spacers that provide the channels for the housing cables. Spacers and the nylon cover are designed with slits that let them pull open, they can be added or removed to get the fit right without having to remove all cables. The innovative 3D forging technology and the flat design result in a better aero performance.
Recommended For:
ROAD
GRAVEL
MTB
Tech Specs:
Material: Alloy 6061
Screws: Steel, black
Angle: 82°
Diameter handlebar: 31.7mm
Clamp height: 32mm; 47mm (with topcover)
Fork Steerer: 1 1/8” (28.6mm)
Weight: 175g (110mm)
Note: The internal cable routing (DCR) fits electronic groupset only (up to 3 cables), the semi-integrated cable routing (S-DCR) fits any bike & groupset configuration (up to 4 cables). For the assembly of Deda Alanera, Vinci or Superbox on Colnago C64 Disc & V3RS Disc, Pinarello F & F12, Bottecchia Aerospace and Cervélo Caledonia, is required specific plug spacer (Colnago), compression ring (Pinarello & Bottecchia) or insert (Cervélo).
The lightest Deda Elementi stem in aluminum 7050 with the exclusive RS finish combined with Duracer® technology. With its unique characteristics, Duracer® is a ceramic surface treatment technology which provides extreme hardness and improves the fatigue performance. This allows to remove material in specific zones and to save additional weight. Special titanium screws and a redesigned faceplate bring the weight to the limit of 100 grams.
The Superleggero stem has an exclusive graphic design. The lightest production stem used by professional riders. Alloy 7050 3d forged aluminum stem with black titanium screws.
Recommended For:
ROAD
Tech Specs:
Material: Alloy 7050
Screws: Titanium pvd black
Angle: 82°
Diameter Handlebar: 31.7mm
Fork steerer: 1 1/8” (28.6mm)
Clamp Height: 36mm
Weight: 115g (110mm)Note: Recommended mounting with Deda Elementi carbon handlebars only
The Superzero stem in the exclusive RS finish. The stem finish perfectly matches the new Superzero RS handlebar. Superzero is made of 2014 aluminium series using an innovative 3D forging process to get a completely flat design. Compared to the standard version, the stem features special titanium screws with black PVD finish. Available in five lengths from 90 to 130 mm. The combination with the handlebar delivers the lightest aero kit on the market.
The Superzero stem is the perfect combination of stiffness, lightness and aero shape. The flat top section of the stem results in a better aero performance and guarantees at the same time higher stiffness values. Designed for the most exigent riders, Superzero is made in 2014 aluminum series using an innovative 3D forging process. The stem design features a dedicated aero top cap.
Recommended For:
ROAD
GRAVEL
Tech Specs:
Material: Alloy 2014
Screws: CrMo
Angle: 82°
Diameter handlebar: 31.7mm
Fork Steerer: 1 1/8” (28.6mm)
Clamp Height: 36mm
Included: Top Cap
Weight: 145g (110mm)Note: Recommended mounting with Deda Elementi handlebars only
The Vinci stem is the first Deda stem designed to allow a fully integrated cable routing when assembled with Deda handlebars featuring the new DCR system (Deda internal cable routing). Vinci is the most polyvalent stem on the market being compatible with traditional 1-1/8” fork steerer as well as 1-1/4”. The DCR system works with a standard tapered steerer with 1-1/8” upper diameter, but requires a 52mm (1.5”) upper headset bearing od. The stem leaves room at the back for the cables to fit the gap in between the headset bearing and the fork.
The Vinci stem system features special spacers that provide the channels for the housing cables. Spacers are designed with slits that let them pull open, they can be added or removed to get the fit right without having to remove all cables. The innovative 3D forging technology and the flat design result in a better aero performance. The aero integrated topcap, headset spacers and alloy sleeve adapter for 1-1/8” fork steerer complete the line of accessories included.
Recommended For:
ROAD
Tech Specs:
Material: Alloy 2014
Screws: Steel, black
Angle: 73°
Diameter handlebar: 31.7mm
Fork Steerer: 1 1/4” (31.75mm), adapter included for 1 1/8”
Clamp height: 40mm (including the upper headset spacer)
Weight: 260g (110mm)Note: Compatible with full internal cables routing (up to 4 cables); Deda DCR headset is required
Zero100 stem is extremely versatile because combines lightweight, strength and reliability. It is the perfect choice for sportive or endurance bikes but also one of the preferred choices of Pro riders. Designed and manufactured in 2014 alloy series, the stem features a 82 degrees angle with a wide size options from 80mm to 140mm to suit any position.
Recommended For:
ROAD
GRAVEL
Tech Specs:
Zero100 stem is extremely versatile because combines lightweight, strength and reliability. It is the perfect choice for sportive or endurance bikes but also one of the preferred choices of Pro riders. Designed and manufactured in 2014 alloy series, the stem features a 82 degrees angle with a wide size options from 80mm to 140mm to suit any position. And now, the infamous Zero100 stem is available in the Classic version.
The Zero2 stem is a perfect balance between engineering and design. The stem is available in a wide range of sizes from 50 to 130 mm. This makes the Zero2 stem the perfect choice also for bike fitters helping cyclists to find the best position on the bike. The Zero2 stem is suitable for high performance bikes at an affordable price. Available in POB (polish on black) finish.
ROAD 
GRAVEL
