Introducing the new Darimo IX2 stem, the perfect stem for your mountain or road bike with a weight of just 66 grams in 100 mm length.

The stem is manufactured in a single piece from unidirectional and bidirectional carbon fabrics. It has a careful construction and lamination that allow to reduce weight maintaining vertical and torsional stiffness. The front part has an integrated cap, non-removable, with the two screws on the bottom which gives a perfect aesthetic.

Like all our products, each stem is laminated by hand, then the exact number of carbon layers with correct direction are placed at each stem point.

In combination with carbon, M4 titanium screws are used with a bigger head to prevent damages during the assembly. The small nuts are made with anodized 7075 aluminum.
• Finishes: UD Matte
• Weight limit: The Darimo stem is safe and exceeds the tests of ISO 4210-2, but it is not recommended for riders over 90 kg. Request the reinforced version if necessary.
• Uses: Road, x-cross, MTB.
• Clamping diameter: 31.8mm
• Angles: -6º, -12º, -17º y -25º
• Steering diameters: 1-1/8″ and 1-1/4″ oversize version.
• Clamping width: 46mm
• Stack height: 46mm
• Road handlebar compatibility: Darimo Ellipse. Not compatible with aero handlebar (wider at top zone)
• Materials:
– Body: Unidirectional and bidirectional carbon fibre fabrics
– Nuts: Anodized 7075 T6 aluminum
– Bolts: Ti Gr5 M4

Angle

-6, -12, -17

Size

80MM, 90MM, 100MM, 110MM, 120MM, 130MM