This extra wide bearing is used primarily used by White Industries in their rear hubs. The extra wide design greatly reduces flex in axle of the rear hub. The Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD-15 with ceramic or stainless balls. Enduro's bearings are always engineered with deepest groove races possible to accommodate the largest balls and feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements.

CXD 3802W | XD-15 the ultimate upgrade The most impressive feature of XD-15 ceramic-hybrid bearings is, unlike other bearings, they only get better with time and use. As the bearings wear-in, the super-hard ceramic balls actually make the XD-15 races even smoother. So, when compared to other ceramic-hybrid bearings on the market that claim speed and power advantages on day one, Enduro XD-15 bearings not only provide the same initial advantages on day one, but will become faster and smoother with time and use, while the other ceramic-hybrid options will only get slower. Enduro is so confident in the performance of their XD-15 Ceramic-Hybrid bearings that they carry a limited lifetime warranty against wear and corrosion. • Deep groove design corrosion-proof, cryogenically treated nitrogen steel races • Grade 5 balls (Silicon-Nitride Ceramic) increase bearing life • Fill Kluber NBU52 grease that runs smoother with time and highly resistant to being washed out • Static load: 564lbf / 2.51kN • Weight: 10.5g

A radial bearing generally used as a hub bearing for some quick release hub designs. The Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD-15 with ceramic or stainless balls. Enduro's bearings are always engineered with deepest groove races possible to accommodate the largest balls and feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements.

A radial bearing generally used as a hub bearing for some quick-release hub designs. The Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD-15 with ceramic or stainless balls. Enduro's bearings are always engineered with deepest groove races possible to accommodate the largest balls and feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements.

71801 | Abec-5 Angular Contact In standard radial bearings, only three or four of the balls make contact dring load. But Enduro angular contact bearings work differently. When properly installed and adjusted (black seal facing in), Enduro angular contact bearings engage all of the bearing's balls to spread the force over a larger surface area, decreasing friction, minimizing wear and increasing bearing life. • Deep groove design races • Grade 10 balls (high carbon chromium steel) • Fill with high pressure water proof grease • Higher tolerances and higher quality output than ABEC-3 • Static load: 234lbf / 1.04kN • Weight: 5.9g

CXD 6801 | XD-15 the ultimate upgrade The most impressive feature of XD-15 ceramic-hybrid bearings is, unlike other bearings, they only get better with time and use. As the bearings wear-in, the super-hard ceramic balls actually make the XD-15 races even smoother. So, when compared to other ceramic-hybrid bearings on the market that claim speed and power advantages on day one, Enduro XD-15 bearings not only provide the same initial advantages on day one, but will become faster and smoother with time and use, while the other ceramic-hybrid options will only get slower. Enduro is so confident in the performance of their XD-15 Ceramic-Hybrid bearings that they carry a limited lifetime warranty against wear and corrosion. • Deep groove design corrosion-proof, cryogenically treated nitrogen steel races • Grade 5 balls (Silicon-Nitride Ceramic) increase bearing life • Fill with Kluber NBU52 grease that runs smoother with time and highly resistant to being washed out • Static load: 234lbf / 1.04kN • Weight: 5.6g

A radial bearing generally used as a front hub bearing and has be used as a pivot bearing. The Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD-15 with ceramic or stainless balls. Enduro's bearings are always engineered with deepest groove races possible to accommodate the largest balls and feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements.

71804 | Abec-5 Angular Contact In standard radial bearings, only three or four of the balls make contact dring load. But Enduro angular contact bearings work differently. When properly installed and adjusted (black seal facing in), Enduro angular contact bearings engage all of the bearing's balls to spread the force over a larger surface area, decreasing friction, minimizing wear and increasing bearing life. • Deep groove design races • Grade 10 balls (high carbon chromium steel) • Fill with high pressure water proof grease • Tighter tolerances and higher quality output than ABEC-3 • Static load: 501lbf / 2.23kN • Weight: 16.4g

CXD 6804 | XD-15 the ultimate upgrade The most impressive feature of XD-15 ceramic-hybrid bearings is, unlike other bearings, they only get better with time and use. As the bearings wear-in, the super-hard ceramic balls actually make the XD-15 races even smoother. So, when compared to other ceramic-hybrid bearings on the market that claim speed and power advantages on day one, Enduro XD-15 bearings not only provide the same initial advantages on day one, but will become faster and smoother with time and use, while the other ceramic-hybrid options will only get slower. Enduro is so confident in the performance of their XD-15 Ceramic-Hybrid bearings that they carry a limited lifetime warranty against wear and corrosion. • Deep groove design corrosion-proof, cryogenically treated nitrogen steel races • Grade 5 balls (Silicon-Nitride Ceramic) increase bearing life • Fill with Kluber NBU52 grease that runs smoother with time and highly resistant to being washed out • Static load: 510lbf / 2.23kN • Weight: 15.54g

A radial bearing generally used as a hub bearing. The Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD-15 with ceramic or stainless balls. Enduro's bearings are always engineered with deepest groove races possible to accommodate the largest balls and feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements.

CXD 6902 | XD-15 the ultimate upgrade The most impressive feature of XD-15 ceramic-hybrid bearings is, unlike other bearings, they only get better with time and use. As the bearings wear-in, the super-hard ceramic balls actually make the XD-15 races even smoother. So, when compared to other ceramic-hybrid bearings on the market that claim speed and power advantages on day one, Enduro XD-15 bearings not only provide the same initial advantages on day one, but will become faster and smoother with time and use, while the other ceramic-hybrid options will only get slower. Enduro is so confident in the performance of their XD-15 Ceramic-Hybrid bearings that they carry a limited lifetime warranty against wear and corrosion. • Deep groove design corrosion-proof, cryogenically treated nitrogen steel races • Grade 5 balls (Silicon-Nitride Ceramic) increase bearing life • Fill with Kluber NBU52 grease that runs smoother with time and highly resistant to being washed out • Static load: 558lbf/ 2.48kN • Weight: 13.87g