SE MX 2437 AL 6061 - 24mm (Shimano) Bottom Bracket Seal - 24mm x 37mm
For cranksets with 24mm (Shimano) spindles. This seal that fits directly to the bearing, making it something of a universal fit. If there is any confusion, this seal will work.
Enduro bearings are designed and built to last, but unfortunately sometimes some of the parts that surround them can still wear out. This light-contact silicone seal is the new universal face seal that comes with Enduro TorqTite Solid-Lube bottom brackets for 24mm spindles. This light contact seal seals directly to the bearing OD to make it a more universal fit. Apply a thin film of grease on the back side of the seal for optimum seal performance.
For cranksets with 29mm (SRAM DUB) spindles. This seal that fits directly to the bearing, making it something of a universal fit. If there is any confusion, this seal will work.
Enduro bearings are designed and built to last, but unfortunately sometimes some of the parts that surround them can still wear out. This light-contact silicone seal is the same new universal face seal that comes with Enduro TorqTite Solid-Lube bottom brackets for SRAM DUB cranksets. This light contact face seal seals directly to the bearing OD to make it a more universal fit. Apply a thin film of grease on the back side of the seal for optimum seal performance.
We also make a version of this seal for more extreme wet conditions (SE MX 3042 AL 6061), identical except for the higher-pressure contact to the outer bearing race.
SE MX 3042 AL V2 - 30mm Bottom Bracket Seal - 30mm x 42mm
For cranksets with 30mm spindles. This seal that fits directly to the bearing, making it something of a universal fit. If there is any confusion this seal will work.
Enduro bearings are designed and built to last, but unfortunately sometimes some of the parts that surround them can still wear out. This light-contact silicone seal is similar to the new face seal that comes with Enduro TorqTite Solid-Lube bottom brackets for cranksets with 30mm spindles. This light contact seal seals directly to the bearing OD to make it a more universal fit. Apply a thin film of grease on the back side of the seal for optimum seal performance.
This tools allow you install and remove the newer threaded bottom brackets Shimano with the smaller outer diameter cups. One side works for Dura Ace and XTR while the other side fits Ultegra and XT cups.
It features a 3/8" inch drive on the backside for use with a torque wrench or breaker bar. Precision manufactured of the same aluminum alloy as our BB cups to ensure solid no-mar cup installation or removal.
Enduro makes a wide selection of spacers and seals to ensure proper custom bottom bracket and crankset spacing no matter what the combination of components
We have packaged the same Kluber NBU52 extra high pressure grease we use in all Enduro XD-15, ceramic zero, ceramic hybrid, and stainless steel bearings. Kluber NBU52 only runs better and smoother with time and is highly resistant to being washed out. It is engineered to stick to the balls and continually be pulled back into the ball path where it is needed. Conveniently packaged in a syringe for precise grease application.
This tool is for making adjustments on a bicycle when pedals are not in place or present. The Enduro Pedal Dummy Tool anodized aluminum shaft threads into crank arm and rotates smoothly on one larger, stainless 6302 bearing.
Please note this is for drive-side ISO right-hand thread crank arms only.
The Enduro MT-002 Digital Caliper Tool is designed for precision and durability, making it an essential tool for both DIY enthusiasts and professionals. With a 150mm capacity, this caliper features a hardened stainless steel body that ensures long-lasting performance. Easily switch between metric and imperial measurements, including fractional inches, to meet your specific needs. The tool comes with a battery included, allowing you to start measuring right away with confidence.
Full stainless steel construction, utilizing a smooth rod and sliding handle to remove hard to remove bearings. 9 blind pliers extractor tools range in size from 6 to 32mm and allow for the removal of bearings that cannot be pulled out from the back. The bearing mallet adapter features interchangeable mallet tip interface, and the reverse is 1 inch. cassette holder locking tools.
We call it a Torqtite wrench but it actually does a lot more than that. This Tool allows you to tighten and loosen TorqTite BB cups for BB86/92, BB386 and PF30 BB shells as well as outboardBSA/ITA cups for 24mm spindles and all T47 cups. The BB86/92 sidealso works for centerlock disc brake lock-rings.
This item is a single wrench, though we recommend two for proper TorqTite BB installation, or a single wrench can be used in conjunction with BBT-001, BBT-015, BBT-029 or BBT-025 on the opposite side.
WA 37x41x3.5 - 37mm ID TorqTite sleeve spacer for BBRight framesets - 37mm x 41mm x 3.5mm (6061 Aluminum)
This spacer adds 3.5mm of additional width to the Torqtite sleeve for use with BBRight framesets
Enduro makes a wide selection of spacers and seals to ensure proper custom bottom bracket and crankset spacing no matter what the combination of components
Adapter to retrofit 24mm x 37mm non-drive side bottom bracket bearing to SRAM GXP cranksets.
Enduro makes a wide selection of spacers and seals to ensure proper custom bottom bracket and crankset spacing no matter what the combination of components
Heavy Wave Washer for removing that last bit of play and ensure proper bearing loading. This wave washer is recommended for use with Angular-Contact bearings.
Light Action Wave Washer for removing that last bit of play from 24mm BB spindles and ensure proper bearing loading. 0.4mm/Light-action is recommended for use with radial bearings.
Enduro makes a wide selection of spacers and seals to ensure proper custom bottom bracket and crankset spacing no matter what the combination of components.
WA 46-AL-1 - 46mm ID BB Cup Spacer - 1mm (6061 Aluminum)
46mm ID 1mm thick 6061 Aluminum Spacer for PF30, BB386 and BBRight bottom bracket cups.
Enduro makes a wide selection of spacers and seals to ensure proper custom bottom bracket and crankset spacing no matter what the combination of components
The ultimate upgrade pulley. Guaranteed to last forever against corrosion
Precision machined Delrin® Derailleur pulleys featuring XD-15 Ceramic-Hybrid, radial bearings for enhanced shifting performance and longevity. Designed and manufactured for performance, these pulleys feature CN (tight clearance) bearings in the upper pulley to maximize shifting accuracy and C4 (loose clearance) bearings in the lower pulley to allow for chain-line movement.
500 AF Delrin® pulley material features a high mechanical tensile strength and rigidity, natural lubricity, high resistance to moisture, caustic chemicals and UV makes these pulleys highly durable, rigid and very smooth. Delrin also machines very cleanly and precisely. The inherent lubricative qualities of this Teflon® infused material greatly reduces friction when it interfaces with the bicycle chain. When compared to other pulley materials, 500 AF Delrin® with Teflon®, offers significantly less drag than pulleys machined from aluminum or titanium.
An Enduro Bearings exclusive, our XD-15 Ceramic-Hybrid bearings combine corrosion-proof, cryogenically treated nitrogen steel races with Silicon Nitride Grade 3 ceramic balls in a proprietary process that results in the ultimate high performance bearing setup. The deep-groove design raceways allow for maximum sized Grade 3 Silicon Nitride ceramic balls for for increased contact area and improved performance and longevity. 90% fill Kluber NBU52 grease only runs better and smoother with time and is highly resistant to being washed out. It is engineered to stick to the balls and continually be pulled back into the ball path where it is needed.
The 12 tooth upper pulley/14 tooth lower pulley set 5mm bolt-holes is designed as an upgrade for SRAM 12 speed cable-actuated Eagle derailleurs (includes XD-15 cable idler pulley.)
Enduro Derailleur Pulleys are available in a number of configurations and performance levels, starting with Ceramic-Hybrid, Black-Oxide treated Zero Ceramic as a step up, and XD-15 Ceramic-Hybrid at the top of the line. All are proudly precision manufactured in the USA.
