Product Categories
Brands list
Search
ENDURO 698 MAX Suspension Bearing – 8mm x 19mm x 6mm
Login to view priceEnduro Bearings pioneered MAX type bearings over 20 years ago for bicycles to address the challenges associated with mountain bike pivots. MAX-type bearings provide 35-40% more load capacity than standard Angular-Contact bearings by utilizing a special design where the maximum number of balls are inserted into the bearing, via a custom ground slot in the races. The additional balls, combined with deep race grooves in these bearings providing greater lateral support for the twisting and multi-directional forces associated with mountain bike pivots.
This bearing has been used as a suspension pivot bearing by a number of bicycle brands including Rocky Mountain.
698 MAX | Abec-3- Deep groove design races
- Grade 10 balls (high carbon chromium steel)
- Fill with Almagard extra high pressure grease
- Static load: 355lbf / 1.58kN
- Weight: 7.12g
ENDURO 698 Miniature Bearing – 8mm x 19m x 6mm
Login to view price
ENDURO 699 Miniature Bearing – 9mm x 20m x 6mm
Login to view priceCXD 699 | XD-15 the ultimate upgrade The most impressive feature of XD-15 ceramic-hybrid bearings is, unlike other bearings, they only get better with time and use. As the bearings wear-in, the super-hard ceramic balls actually make the XD-15 races even smoother. So, when compared to other ceramic-hybrid bearings on the market that claim speed and power advantages on day one, Enduro XD-15 bearings not only provide the same initial advantages on day one, but will become faster and smoother with time and use, while the other ceramic-hybrid options will only get slower. Enduro is so confident in the performance of their XD-15 Ceramic-Hybrid bearings that they carry a limited lifetime warranty against wear and corrosion. • Deep groove design corrosion-proof, cryogenically treated nitrogen steel races • Grade 5 balls (Silicon-Nitride Ceramic) increase bearing life • Fill with Kluber NBU52 grease that runs smoother with time and highly resistant to being washed out • Static load: 245lbf / 1.09kN • Weight: 6.5g
ENDURO 7001 MAX Suspension Bearing – 12mm x 28mm x 8mm
Login to view priceEnduro Bearings pioneered MAX type bearings over 20 years ago for bicycles to address the challenges associated with mountain bike pivots. MAX-type bearings provide 35-40% more load capacity than standard radial bearings by utilizing a special design where the maximum number of balls are inserted into the bearing, via a custom ground slot in the races. The additional balls, combined with deep race grooves in these bearings provide greater lateral support for the twisting and multi-directional forces associated with mountain bike pivots.
When properly installed (black seal facing in) and adjusted, Enduro Angular Contact (A/C) bearings engage all of the bearing's balls to spread the force over a larger surface area, decreasing friction, minimizing wear and increasing bearing life.
This bearing has been used as a suspension pivot bearing by Intense. 7001 MAX | Abec-3 Angular Contact
ENDURO 7900 MAX Suspension Bearing – 10mm x 22mm x 6mm
Login to view priceEnduro Bearings pioneered MAX type bearings over 20 years ago for bicycles to address the challenges associated with mountain bike pivots. MAX-type bearings provide 35-40% more load capacity than standard radial bearings by utilizing a special design where the maximum number of balls are inserted into the bearing, via a custom ground slot in the races. The additional balls, combined with deep race grooves in these bearings provide greater lateral support for the twisting and multi-directional forces associated with mountain bike pivots.
When properly installed (black seal facing in) and adjusted, Enduro Angular Contact (A/C) bearings engage all of the bearing's balls to spread the force over a larger surface area, decreasing friction, minimizing wear and increasing bearing life.
This bearing has been used as a suspension pivot bearing by Santa Cruz. 7900 MAX | Abec-3 Angular Contact
ENDURO 7900 ZS MAX Suspension Bearing – 10mm x 22mm x 6mm
Login to view priceEnduro Bearings pioneered MAX type bearings over 20 years ago for bicycles to address the challenges associated with mountain bike pivots. MAX-type bearings provide 35-40% more load capacity than standard radial bearings by utilizing a special design where the maximum number of balls are inserted into the bearing, via a custom ground slot in the races. The additional balls, combined with deep race grooves in these bearings provide greater lateral support for the twisting and multi-directional forces associated with mountain bike pivots.
When properly installed (black seal facing in) and adjusted, Enduro Angular Contact (A/C) bearings engage all of the bearing's balls to spread the force over a larger surface area, decreasing friction, minimizing wear and increasing bearing life.
The single seal specification is designed for use with grease injection systems like those found in linkages on most Santa Cruz bikes. 7900 1ZS MAX | Abec-3 Angular Contact
ENDURO 7901 MAX Suspension Bearing – 12mm x 24mm x 6mm
Login to view priceEnduro Bearings pioneered MAX type bearings over 20 years ago for bicycles to address the challenges associated with mountain bike pivots. MAX-type bearings provide 35-40% more load capacity than standard radial bearings by utilizing a special design where the maximum number of balls are inserted into the bearing, via a custom ground slot in the races. The additional balls, combined with deep race grooves in these bearings provide greater lateral support for the twisting and multi-directional forces associated with mountain bike pivots.
When properly installed (black seal facing in) and adjusted, Enduro Angular Contact (A/C) bearings engage all of the bearing's balls to spread the force over a larger surface area, decreasing friction, minimizing wear and increasing bearing life. 7901 MAX | Abec-3 Angular Contact
ENDURO 7902 1ZS MAX Suspension Bearing – 15mm x 28mm x 7mm
Login to view priceEnduro Bearings pioneered MAX type bearings over 20 years ago for bicycles to address the challenges associated with mountain bike pivots. MAX-type bearings provide 35-40% more load capacity than standard radial bearings by utilizing a special design where the maximum number of balls are inserted into the bearing, via a custom ground slot in the races. The additional balls, combined with deep race grooves in these bearings provide greater lateral support for the twisting and multi-directional forces associated with mountain bike pivots.
When properly installed (black seal facing in) and adjusted, Enduro Angular Contact (A/C) bearings engage all of the bearing's balls to spread the force over a larger surface area, decreasing friction, minimizing wear and increasing bearing life.
This single seal specification is designed for use with grease injection systems like those found in linkages on most Santa Cruz bikes. 7902 1ZS MAX | Abec-3 Angular Contact
ENDURO 7902 MAX Suspension Bearing – 15mm x 28mm x 7mm
Login to view priceEnduro Bearings pioneered MAX type bearings over 20 years ago for bicycles to address the challenges associated with mountain bike pivots. MAX-type bearings provide 35-40% more load capacity than standard radial bearings by utilizing a special design where the maximum number of balls are inserted into the bearing, via a custom ground slot in the races. The additional balls, combined with deep race grooves in these bearings provide greater lateral support for the twisting and multi-directional forces associated with mountain bike pivots.
When properly installed (black seal facing in) and adjusted, Enduro Angular Contact (A/C) bearings engage all of the bearing's balls to spread the force over a larger surface area, decreasing friction, minimizing wear and increasing bearing life.
This bearing has been used as a suspension pivot bearing by Santa Cruz.
7902 MAX | Abec-3 Angular Contact- Deep groove design races
- Grade 10 balls (high carbon chromium steel)
- Fill with Almagard extra high pressure grease
- Static load: 812lbf / 3.61kN
- Weight: 15.08g
ENDURO 7903 MAX Suspension Bearing – 15mm x 28mm x 7mm
Login to view priceEnduro Bearings pioneered MAX type bearings over 20 years ago for bicycles to address the challenges associated with mountain bike pivots. MAX-type bearings provide 35-40% more load capacity than standard radial bearings by utilizing a special design where the maximum number of balls are inserted into the bearing, via a custom ground slot in the races. The additional balls, combined with deep race grooves in these bearings provide greater lateral support for the twisting and multi-directional forces associated with mountain bike pivots.
When properly installed (black seal facing in) and adjusted, Enduro Angular Contact (A/C) bearings engage all of the bearing's balls to spread the force over a larger surface area, decreasing friction, minimizing wear and increasing bearing life.
This bearing has been used as a suspension pivot bearing by Yet and Guerrilla Gravity. 7903 MAX | Abec-3 Angular Contact
ENDURO ACB 3645 1125 SS Headset Bearing – 30.5mm x 41.8mm x 6.5mm; 36×45 deg
Login to view price
ENDURO ACB 3645 3344 SS Headset Bearing – 33mm x 44mm x 6mm; 36×45 deg.
Login to view priceIn standard radial bearings, only three or four of the balls make contact during load. But Enduro angular contact bearings work differently. When properly installed and adjusted (black seal facing in), Enduro angular contact bearings engage all of the bearing's balls to spread the force over a larger surface area, decreasing friction, minimizing wear and increasing bearing life. • Deep groove design stainless steel alloy races • Grade 10 balls (stainless steel) • Fill with Almagard 3752 grease • Long life and superior corrosion resistance • Excellent use in wet conditions • Two years anti-corrosion warranty • Static load: 935lbf/ 4.15kN • Weight: 20g
ENDURO ACB 3645 3544 SS Headset Bearing – 35mm x 44mm x 5.5mm
Login to view price- 20% less load capacity of stainless steel
- Slightly softer than standard 52100 chromium steel used
- Excellent alternative for use in wet conditions
- Static load: 935lbf / 4.15kN
- Weight: 20g
ENDURO ACB 3645 3748 BO Headset Bearing – 37mm x 48mm x 6.5mm; 36×45 deg
Login to view priceThis bearing is an angular-contact headset bearing featuring anti-corrosion Black Oxide/Magnetite coated 52100 High-Carbon Chromium alloy races paired with grade 10 Balls. Black Oxide coating provides an extra level of corrosion resistance and extended worry-free performance. ACB 3645 3748 BO | Angular Contact
In standard radial bearings, only three or four of the balls make contact during load. But Enduro angular contact bearings work differently. When properly installed and adjusted (black seal facing in), Enduro angular contact bearings engage all of the bearing's balls to spread the force over a larger surface area, decreasing friction, minimizing wear and increasing bearing life.
ENDURO ACB 3645 5062 SS Headset Bearing – 50mm x 62mm x 8mm: 36 x 45 deg
Login to view price- Deep groove design stainless steel alloy races
- Grade 10 balls (stainless steel)
- Fill with high pressure water proof grease
- Long life and superior corrosion resistance
- Excellent use in wet conditions
- Two years anti-corrosion warranty
- Static load: 935lbf / 4.15kN
- Weight: 20g
ENDURO ACB 3645 SS Headset Bearing – 30.2mm x 41mm x 6.5mm; 36×45 deg
Login to view priceIn standard radial bearings, only three or four of the balls make contact during load. But Enduro angular contact bearings work differently. When properly installed and adjusted (black seal facing in), Enduro angular contact bearings engage all of the bearing's balls to spread the force over a larger surface area, decreasing friction, minimizing wear and increasing bearing life. • Deep groove design stainless steel alloy races • Grade 10 balls (stainless steel) • Fill with Almagard 3752 grease • Long life and superior corrosion resistance • Excellent use in wet conditions • Two years anti-corrosion warranty • Static load: 935lbf/ 4.15kN • Weight: 19.24g
ENDURO ACB 4545 1125 SS Headset Bearing – 30.5mm x 41.8mm x 6.5mm; 45×45 deg
Login to view priceIn standard radial bearings, only three or four of the balls make contact during load. But Enduro angular contact bearings work differently. When properly installed and adjusted (black seal facing in), Enduro angular contact bearings engage all of the bearing's balls to spread the force over a larger surface area, decreasing friction, minimizing wear and increasing bearing life.
ENDURO ACB 4545 1125T SS Headset Bearing – 30.15mm x 41mm x 7mm; 45×45 deg
Login to view priceIn standard radial bearings, only three or four of the balls make contact during load. But Enduro angular contact bearings work differently. When properly installed and adjusted (black seal facing in), Enduro angular contact bearings engage all of the bearing's balls to spread the force over a larger surface area, decreasing friction, minimizing wear and increasing bearing life.
ENDURO ACB 4545 125L SS Headset Bearing – 34.1mm x 46.8mm x 7mm; 45×45 deg
Login to view priceIn standard radial bearings, only three or four of the balls make contact during load. But Enduro angular contact bearings work differently. When properly installed and adjusted (black seal facing in), Enduro angular contact bearings engage all of the bearing's balls to spread the force over a larger surface area, decreasing friction, minimizing wear and increasing bearing life.
ENDURO ACB 4545 125T SS Headset Bearing – 34.1mm x 46.8mm x 7mm; 45×45 deg
Login to view priceIn standard radial bearings, only three or four of the balls make contact during load. But Enduro angular contact bearings work differently. When properly installed and adjusted (black seal facing in), Enduro angular contact bearings engage all of the bearing's balls to spread the force over a larger surface area, decreasing friction, minimizing wear and increasing bearing life.
ENDURO ACB 4545 136 SS Headset Bearing – 32.75mm x 41.75mm x 6mm; 45×45 deg
Login to view priceIn standard radial bearings, only three or four of the balls make contact during load. But Enduro angular contact bearings work differently. When properly installed and adjusted (black seal facing in), Enduro angular contact bearings engage all of the bearing's balls to spread the force over a larger surface area, decreasing friction, minimizing wear and increasing bearing life.
ENDURO ACB 4545 137 SS Headset Bearing – 37mm x 46.85mm x 7mm, 45×45 deg
Login to view priceIn standard radial bearings, only three or four of the balls make contact during load. But Enduro angular contact bearings work differently. When properly installed and adjusted (black seal facing in), Enduro angular contact bearings engage all of the bearing's balls to spread the force over a larger surface area, decreasing friction, minimizing wear and increasing bearing life.
- Deep groove design stainless steel alloy races
- Grade 10 balls (stainless steel)
- Fill with Almagard 3752 grease
- Long life and superior corrosion resistance
- Excellent use in wet conditions
- Two years anti-corrosion warranty
- Static load: 680lbf/ 3.02kN
- Weight: 23.3g
ENDURO ACB 4545 1375 SS Headset Bearing – 37mm x 49mm x 7mm, 45×45 deg
Login to view priceIn standard radial bearings, only three or four of the balls make contact during load. But Enduro angular contact bearings work differently. When properly installed and adjusted (black seal facing in), Enduro angular contact bearings engage all of the bearing's balls to spread the force over a larger surface area, decreasing friction, minimizing wear and increasing bearing life.
ENDURO ACB 4545 150 BO Headset bearing – 40mm x 52mm x 7mm: 45×45 deg
Login to view priceThis size bearing is also known in the bike industry by these part numbers: • HSS 6011 • BAA0695K • TH-070 • MR-128 • MH-P16 • TH MR082
ACB 4545 150 BO - Angular Contact
In standard radial bearings, only three or four of the balls make contact during load. But Enduro angular contact bearings work differently. When properly installed and adjusted (black seal facing in), Enduro angular contact bearings engage all of the bearing's balls to spread the force over a larger surface area, decreasing friction, minimizing wear and increasing bearing life.
- Deep groove design black-oxide treated 52100 high-Carbon Chromium alloy races (extra level of corrosion resistance)
- Fill with Almagard 3752 grease
- Static load: 977lbf / 4.34kN
- Weight: 24g