The innovative Deda H.S.S headset stack spacers system allows installing spacers directly under the top cover, unlike the traditional systems. This gives to the bicycle a completely new looking that better matches modern headtube designs. Deda H.S.S results in a better integration of the headset spacers with the frame increasing at the same time the stiffness and bike handling. Exclusive graphics and POB (polish on black) finish.
Tech Specs:
Material: Carbon
Width: Available for steering tube Ø 46 mm
Height: A kit included 1x3, 1x5, 1x10mm
Finish: Carbon UD; Black Anodized (aluminum version)
Note: Compatible with 1 1/8” (28,6mm) fork steerer only
Jet clip-on are full carbon extensions specially designed and engineered for time trial and long distance triathlon races. The Jet One version is made in UD full carbon construction to get an incredible weight of 660g including all spacers. The design features ergonomic and integrated armrests that allow a full adjustability of length, width, angle and stack height. The fixing plate of the extensions on the bridge is asymmetrical and allows you to adjust the setback of a further +/- 15mm with respect to the axis of the handlebar.
Jet One extensions are delivered with all necessary parts to fit Deda Tribar handlebar or any other Ø31.7 handlebar. Available in two sizes, small (340mm) and medium (370mm) with an additional 60mm of cut to length. Jet have been designed with a 15-degree angle to meet UCI rules at the maximum permitted height. The extensions are compatible with internal cable routing (only electronic groupsets) and comes with comfortable pads and an integrated mount for Garmin®, Wahoo® and Bryton®.
Tech Specs:
• Compatibility: Electronic groupsets
• Material: UD carbon construction
• Bridge and armrest spacers: Alloy 6082
• Length: 340mm (size S) 370mm (size M)
• Length adjustments: Cut to length 280mm (s)
• Extension’s height: 152mm to 183mm
• Angle: 15 degrees
• Armrest width: 110mm to 150mm
• Armrest setback: +/- 15mm
• Stack height: 77mm max
• Diameter handlebar: 31.7mm
• Weight: 660g size S (includes bridge & spacers)
• UCI approved
• Accessories included: Integrated mount for for Garmin, Wahoo, Bryton
Aluminum spacers made in 6061 alloy series, black anodized. Fits 1 1/8” headset (fork steerer outside ø 28,6 mm). Outside ø 34,0 mm; inside ø 28,9 mm. Available in 5 & 10 mm height.
The new Loop bar tape is a professional level addition to your bike with incredibly light weight and outstanding comfort. This bi-color grip has a unique aesthetic and comes in many different color combinations. The tape comes with aluminum end plugs in the same color as the tape. It is made with two different layers for a final thickness of 2.5 mm and 200 cm length to strike the perfect balance of lightness, durability and grip. The tape features an adhesive gel which makes it easy to wrap and keeps the handlebar clean once it is removed.
Aluminium bar end-plugs with anodized finish and texturized Deda logos. Include an expander system to fix the tape into the handlebar by simply tightening with an allen key.
Mini armrest pads for CarbonBlast, Superzero TT and MetalBlast extensions. Made in Lycra (outside) and foam (inside) for more comfort. Central grooves for the sweat.
Tech Specs:
Cross seatpost featuring a 25mm setback. 180 grams ultralight Cross seatpost designed and developed without compromises in terms of reliability and strength. The 1-bolt clamp system allows an easy and fast assembly. A fine adjustment of the saddle inclination is possible through the adjusting screw on the seatpost head. Compatible with oval-shaped carbon rail.
Recommended For: MTB
Tech Specs:
Material: UD full carbon construction
Hardware: CNC alloy plates; titanium pvd black screws
Setback: 25mm
Length: 400mm
Diameter: 31.6 mm (MUDCR316)
Finish: Polish on black (POB)
Note: Compatible with a max Ø7x9.5mm oval-shaped rail. Fits Deda adapter for di2 internal battery
Murex stem comes from a long tradition, revised with modern eyes. It is a quill stem (22.2mm; 7/8’ diameter) for 1” threaded headset, clamp for 26mm handlebar. Features a 73-degree angle with high polished finishing.
Parabolica Uno is the best and light solution to make a road bicycle the perfect weapon for time trial and triathlon races. The product consists of three key components only, J-bend extensions that is made of 6061 aluminium, the forged alloy clamp to fix it to the handlebar and the armrest with self-adhesive velcro pad. A special spacers kit allows to increase up to 55mm the armrest height for a more comfortable position and several possibilities of adjustment.
The Parabolica Pro are the new aluminum extensions designed specifically for time trial, triathlon or ultra cycling races. Fully adjustable extension length and elbow rest width. Spacers of various heights available as accessories.
Spacer height:
20 mm (available as option)
40 mm (available as option)
60 mm (included)
80 mm (available as option)
100 mm (available as option)
120 mm (available as option)
The Riser Spacers Kit for Parabolica and Fastblack 2 series offers the possibilities to adjust the armrest height up to 55mm for a more comfortable position. Made in nylon (nylon carbon reinforced) the kit includes the full set of screws. The spacer kit is available only for the 31,7mm handlebar version. The total weight related to the complete set is 140g.
The Presa bar tape is three in one. It is soft, sticky, and durable. It’s perfect for hard days, long days, wet days. 210 cm rolls per package and 30mm wide, while the 3mm thickness in the middle will deliver a fantastic comfort. The base material is made of EVA foam in different colours, and is covered with black perforated, tacky polyurethane surface material.
The RS01 seatpost completes the vintage looking of your bike. It’s a high polished silver seatpost with a minimal simple clamping system. The fixing mechanism is a classic two-bolt system which you access from underneath for an easy saddle adjustment. Available in 350mm length, 27.2mm diameter and 21mm setback.
Tech Specs:
Material: Aluminum 6061
Diameter: 27.2mm
Setback: 21mm
Length: 350mm
Weight: 333g
Finish: Silver polish finish
Note: Compatible with Deda adapter for DI2 internal battery
S-DCR cover kit is a further application of DCR system (Deda internal cable routing). This solution makes Deda Superzero, Superleggero, Zero100, Zero2, Zero1, Zero, Cross and Peak stem fitting a DCR frame, a quick and smart solution for most of bicycle brands. It allows the full integration of the cables into the frame, like the DCR headset, but leaving a portion of the cables visible under the stem. The system works with a standard tapered fork steerer (1-1/8” - 1.5”) and requires a 52mm (1.5”) upper headset bearing od. The special compression ring design leaves room for the cables to fit the gap in between the headset bearing and the fork. S-DCR cover kit is available with 56mm topcover for standard DCR frames or with 46mm topcover for frames featuring a D-shape fork type.
Tech Specs:
Headset Model: Integrated 1.5” - 1.5”
Headtube: ø 56.0mm
Top cover: Available ø 56mm or 46 (for D-Shape fork type)
New SL4 disc brake is lighter and better performing wheels thanks to the RS hubs upgrade. Ultimate wheelsets specially developed for high-speed use but simply perfect on any kind of course. The rim features a 45 mm asymmetric design combined to a 26 mm wide section that guarantees lightness and stability. 24 spokes count provide high stiffness at a very low weight level. The wider rim generation provides a better support to the tire and reduces the rolling resistance, increasing at the same time the wheel strength. The rim is built with the tubeless-ready technology to be compatible with clincher and tubeless tires. The RS hubs, here equipped with steel bearings, considerably improves the wheels smoothness and guarantees a better pedal’s force transmitting.
Available in POB (Polish on black) finish.
Recommended For:
ROAD
GRAVEL
Tech Specs:
• Material: High modulus carbon fiber ud and 3k combined structure
• Rim height: 45 mm
• Rim width:
- 26 mm external
- 19 mm internal (etrto 622 × 19C)
• Spokes: 24 spokes, front and rear; black
• Nipples: Self-locking ABS® nipples, aluminum, 15 mm length, black
• Hub: AL7075 hub body, 17 mm front axle, 15 mm rear axle, 20T ratchets, steel bearings
• Disk brake rotor: Shimano center lock
• Thru-axle compatibility:
- Front 12 × 100 mm
- Rear 12 × 142 mm
• Freehub: Shimano, Sram XDR, Campagnolo, Campagnolo 13S
• Accessories included: Tubeless rim tape, tubeless valves, center-lock lockring, freehub ratchets lubricant
• Tire compatibility: Clincher or tubeless-ready. Minimum recommended size 25 mm
• Weight: 1.520 g set
Deda SL45 is the wheelset for high-speed use and for all kind of races. The 45mm deep rim profile combined with the 25mm width result in enhanced aerodynamics and reduced rolling resistance. The new wider rim generation provides a better support to the tire delivering at the same time an increased stability and better handling making this wheelset the perfect choice also for gravel roads. The new lightweight hubs are equipped with Enduro ceramic bearing for super high smooth-rolling and ultimate speed.
Rims: 45mm rim depth (high modulus carbon fiber UD and 3K combined structure)
Spokes: Aero profile spokes, 18 front spoke count / 24 rear spoke count; black
Nipples: Self-locking ABS nipples aluminum, 15mm, black
Speciale 26 is a handlebar for the traditionalists. Speciale 26 has the most classic handlebar geometry in the history of cycling, the Italian round. If you’re restoring a bike for L’Eroica, this will do the job beautifully. Fabricated out of 6061 aluminum and available in three widths 42, 44, and 46 cm, measured outside-to-outside, with high polished finish.
Stem alloy sleeve adapter from 28.6mm to 25.4mm, for traditional 1” fork steerer. The Alloy Sleeve adapter is made in 6061 alloy series. Black anodized.
Tech Specs:
The computer mount is available as accessory and includes 3 different inserts to fit Garmin (500, 800, 1000 series), Bryton, Wahoo and a specific GoPro mount. The mount requires the new faceplate of Superbox DCR, available also as spare part to retro-fit the previous Superbox stem version (code FCSBX-DCR) or Superzero RS / Superzero stems (code FCSZ-MOUNT).
