This is the tool for removal and installation of needle bearings in rear shocks on full suspension bicycles. These bearing guides are designed to be used with the BRT-045, front hub and needle bearing press.
Enduro Bearing Press Front Hub over Axle BRT-045.
To be used in conjunction with the Guides from the BRT-500 and/or the NBT-030.
All Enduro tools are Made in the USA. Each tool may have pre-anodized cosmetic defects. These do not affect the performance of the tool and are not an indication that the tool has been used.
The Enduro BRT-005 is your simple and clean answer when you need to press new bearings into either hubs or suspension pivots. The tool contains 18 unique bushing/bushing sets that allows it to adapt to all major sizes of bearings used for hubs and pivots. Bushing sets for the following bearings: 6806, 6805, 6804, 6803, 6802, 6801, 6800, 608, 1526, 1728, 6903, 6902, 6901, 6900, 6000, 6001, R6, and one bushing for 22/24x37 bearings.
All Enduro tools are Made in the USA. Each tool may have pre-anodized cosmetic defects. These do not affect the performance of the tool and are not an indication that the tool has been used.
This simple little expanding tool allows you to grab smaller sized bearings from the backside and work it out with the help of a screwdriver or similar type of lever.
This tool set allows you to pull bearings that are pressed into a housing, as found in all hubs and pivots. Includes a full selection of expandable pullers to work on bearings with an inside diameter between 8-32mm. Featuring Black Oxide coated pullers and plated slide hammer. Bearings not included.
This adapter allows you to remove 30mm ID and 29mm ID DUB bearings in BSA30/ITA30 threaded cups with the BRT-040 (29mm or 30mm) kit and the medium press rod from the BRT-060 (BRT-060-M).
Lightweight alternative to traditional chain whips, for use in conjunction with lockring tool to secure the cassette while removing the lockring.
Weighing in at just 89g and taking up minimal space, this is a great tool for any race mechanics tool box!
SE 29.5x36x2.5 VB - Upgrade Silicone Freewheel Seal for DT Swis as 240 and 350 hubs - 29.5mm x 36mm x 2.5mm
This full-contact silicone seal presses directly onto the hub shell of certain DT Swis as hubs to seal the star-ratchet assembly to provide a superior seal against the elements.
This tool allow you install PF30, BB386 TorqTite and traditional BSA and Italian external threaded bottom bracket cups for SRAM DUB (29mm) cranksets. It also works fine for cups for 30mm cranksets and T47 cups for 29mm & 30mm spindles
It features a 3/8" inch drive on the backside for use with a torque wrench or breaker bar. Precision manufactured of the same aluminum alloy as our BB cups to ensure solid no-mar cup installation or removal.
This spline tool allows you to install and remove Maxhit BB cups for BSA24, 29 and 30 as well as outboard Shimano XT and Ultegra BB cups (FC-25) along with standard BSA29/DUB and BSA30 cups.
This rebuild kit includes quad rings, O-rings, dust wiper, travel andicator O-ring and back-up rings for Fox Float Air shocks.
Superior performance from superior materials and design. Enduro fork seals feature dual-lip Polyurethane wipers and oil seals that solve the problems with standard rubber seal designs like "stiction" and contamination. They keep the dirt out and the oil inside. Enduro Bearings wipers seal better, move faster, are slicker, last longer, and run quieter than stock wipers. Moly Disulphide lubricated lower oil seals move freer, while never leaking a drop of oil, providing smooth performance over longer periods without maintenance.
Enduro Fork Seals are available for most major brands and models of suspension forks at substantial savings and improvement over stock wipers. We also manufacture and stock seals for many suspension forks that are no longer supported by the original manufacturer, so you can keep that old fork running smoothly.
This tool set is designed to remove the Ride-9 and Ride-4 systems on Rocky Mountain frames for FOX rear suspension service. It allows safe removal of the aluminium caps attached to the shock.
Sometimes this little delicate parts can get bent or broken, this is the exact replacement for the spring that keeps the two halves of split-collet together.
Loose ball bike parts are still out there, so Enduro carries the loose balls you need to complete the job.
Grade 5 balls meet or exceed 5/1,000,000 tolerance of sphericity and is considered extremely round, to the point that races can't be ground to match that level of precision. This is the same level of ball that is found in Enduro ABEC-5 bearings. Only a few years ago, Grade 25 would be considered a very high grade ball, used only in the best hubs and bottom brackets. Today, Enduro's entry-level ABEC-3 bearings feature Grade 10 balls and then Grade 5 or Grade 5 as you go up in price and performance.
The ultimate upgrade for your rolling components, Enduro Ceramic Balls are made from pure Silicon Nitride material (Si3N4) with extreme high density from uniform compaction (3.25 g/cm3), the micro-structural elements of this material is second to none. There are quite a few different materials used for ceramic balls and races in the Industry, at Enduro we only use the best, Silicon Nitride from Japan. The high precision Grade 5 Si3N4 pure ceramic balls are 5/1,000,000" from exactly round in sphericity. 60% lighter weight and 7 times harder than steel, friction is reduced to the lowest level possible. Tougher and less brittle than other ceramic materials, there is simply no comparison for corrosion resistance or magnetic problems with Enduro Si3N4 balls.
Precision-machined guides for the removal of Zero-Stack headset cups (or Maxhit bearings) from the head tube of the bicycle. These guides are designed to slide into the cup from the outside and allow the user to easily punch out the cup from the opposite side. This set comes with two guides one for 44mm upper cups and another for 56mm lower cups.
This kit is a great complement to the BRT-030 punch set, and is designed to work with the 10mm sized punch perfectly.
Quick on/off knurled handle set compatible with all press rods listed below
3/8" heavy duty ACME threaded rod x 11 inches length for headset cup and bearing installation
8mm ACME threaded rod x 8 inches length for pressing in bearing hubs, bottom bracket bearings, etc.
8mm ACME threaded rod x 3 inches length for tight spots like suspension bearing pivots
Multiple guides for headset bearings and cups
Carrying case
Each of the 3 rods has its own set of threaded bearing "pushers" with a rotating contact pad that isolates the bearing guides from friction. One end of each rod set has bearing pusher that is fixed in place, while the other threads up and down the rod. The beautifully machined handles snap on and off the 15mm hex heads. In place of the handles, 15mm wrenches can be used for jobs in tight spaces.
Enduro makes a wide selection of spacers and seals to ensure proper custom bottom bracket and crankset spacing no matter what the combination of components.
We have packaged the same Mobil XHP 222extra high pressure grease we use in all Enduro ABEC 5 angular contact, ABEC 5 radial bearings ABEC 3 bearings. Mobil XHP 222 is an excellent and clean rolling grease and which also features great water displacement characteristics. Well suited to any and all bikes and riding conditions. Conveniently packaged in a syringe for precise grease application.
This labor saving tool allows you to safely and easily remove and install 6806 bearings into any model BB30 or PF30 bottom bracket while the cups are still in the bike. This tool can be easily adapted for DUB BBs by adding the BRT-016 DUB adapter kit.
This tools allow you install BB386, BB30/PF30 TorqTite and T47 external threaded bottom bracket cups for 30mm and 24mm cranksets. The 24mm side works fine for cups with DUB/29mm bearings as well.
It features a 3/8 inch drive on the backside for use with a torque wrench or breaker bar. Precision manufactured of the same aluminum alloy as our BB cups to ensure solid no-mar cup installation or removal.
