ENDURO BSA 68 To 30mm Crankset
RM462.00 – RM786.00
• BKS-6053
BSA Thread-In, Angular Contact, Stainless Steel Bottom Bracket For 30mm Cranksets (Spindle Length Of 104mm or more)
This thread-in solution allows you to fit your 30mm/386 cranks into your BSA threaded bottom bracket shell without any hassle. This complete bottom bracket features Angular Contact, 440C stainless steel balls and races to provide long life and superior corrosion resistance in applications and environments that may be less than ideal. Though stainless steel has 20% less load capacity and is slightly softer than our standard 52100 chromium steel used in most of our bearings, stainless steel is an excellent alternative for use in wet conditions, if you wash your bike often, or where sweat can be a problem. Enduro Bearings also uses LLB type seals and CRC Marine Grease in these bearings to additionally water proof against the elements. We are so confident in the quality and performance of theses bearings.
This is just one of the huge range of solutions that Enduro makes for the wide range of bottom bracket standards on the market today. For the full range of BB solutions please check out our BB Solutions Chart. Enduro offers a solution for just about any configuration at multiple price/performance levels, ranging from standard ABEC-3, up to XD-15 Ceramic Hybrid bearings featuring a lifetime guarantee.
• BKC-0805
BSA Thread-In Ceramic-Hybrid, XD-15, Angular Contact, Bearing Bottom Bracket For 68mm BSA Framesets And 30mm Cranksets
An Enduro Bearings exclusive, our XD-15 Pro BBs feature XD-15 15degree Angular Contact cartridge bearings pressed into precision machined aluminum cups that simply thread directly into the BB shell. Utilizing the same XD-15 steel as our XD-15 Corsa bearing, Enduro XD-15 Pro bearings offer a 15degree angular contact sealed bearing in a standard-sized cartridge. XD-15 Pro bearings feature deep-groove raceways allowing for maximum sized Grade 5 Silicon Nitride ceramic balls for increased contact area and improved performance and longevity. Enduro XD-15 bottom brackets are manufactured to the highest standards at the Enduro Bearings production facility in California, USA. Enduro XD-15 bearings combine corrosion-proof, cryogenically treated nitrogen steel races with Silicon Nitride Grade 5 ceramic balls in a proprietary process that results in the ultimate high performance bearing setup.
This thread-in solution allows you to fit your 30mm/386 cranks into your BSA threaded bottom bracket shell without any hassle.
The most impressive feature of these bearings is, unlike other bearings, they only get better with use. As the bearings wear-in, the balls actually make the races even smoother. So, when compared to other ceramic-hybrid bearings on the market that claim speed and power advantages on day one, Enduro XD-15 bearings not only provide the same initial advantages on day one, but will get even faster and smoother with time and use, while the other ceramic-hybrid options will only get slower.
Finding the right bottom bracket solution for the ever-growing range of bicycles on the market is not always an easy task. At Enduro we currently offer over 50 different types of bottom brackets for various bottom bracket shell and crankset combinations in multiple price/performance levels. Enduro bearings offers threaded options for BSA, BSA 30, Italian and the robust T47 system. For press-fit bottom brackets we created the oft-copied, thread-together Torqtite bottom brackets as well as press-fit Delrin Cup options. We even offer flanged, double-row bearings to fit 30mm cranksets in BB86 shells!
• BKS-6053
BSA Thread-In, Angular Contact, Stainless Steel Bottom Bracket For 30mm Cranksets (Spindle Length Of 104mm or more)
This thread-in solution allows you to fit your 30mm/386 cranks into your BSA threaded bottom bracket shell without any hassle. This complete bottom bracket features Angular Contact, 440C stainless steel balls and races to provide long life and superior corrosion resistance in applications and environments that may be less than ideal. Though stainless steel has 20% less load capacity and is slightly softer than our standard 52100 chromium steel used in most of our bearings, stainless steel is an excellent alternative for use in wet conditions, if you wash your bike often, or where sweat can be a problem. Enduro Bearings also uses LLB type seals and CRC Marine Grease in these bearings to additionally water proof against the elements. We are so confident in the quality and performance of theses bearings.
This is just one of the huge range of solutions that Enduro makes for the wide range of bottom bracket standards on the market today. For the full range of BB solutions please check out our BB Solutions Chart. Enduro offers a solution for just about any configuration at multiple price/performance levels, ranging from standard ABEC-3, up to XD-15 Ceramic Hybrid bearings featuring a lifetime guarantee.
• BKC-0805
BSA Thread-In Ceramic-Hybrid, XD-15, Angular Contact, Bearing Bottom Bracket For 68mm BSA Framesets And 30mm Cranksets
An Enduro Bearings exclusive, our XD-15 Pro BBs feature XD-15 15degree Angular Contact cartridge bearings pressed into precision machined aluminum cups that simply thread directly into the BB shell. Utilizing the same XD-15 steel as our XD-15 Corsa bearing, Enduro XD-15 Pro bearings offer a 15degree angular contact sealed bearing in a standard-sized cartridge. XD-15 Pro bearings feature deep-groove raceways allowing for maximum sized Grade 5 Silicon Nitride ceramic balls for increased contact area and improved performance and longevity. Enduro XD-15 bottom brackets are manufactured to the highest standards at the Enduro Bearings production facility in California, USA. Enduro XD-15 bearings combine corrosion-proof, cryogenically treated nitrogen steel races with Silicon Nitride Grade 5 ceramic balls in a proprietary process that results in the ultimate high performance bearing setup.
This thread-in solution allows you to fit your 30mm/386 cranks into your BSA threaded bottom bracket shell without any hassle.
The most impressive feature of these bearings is, unlike other bearings, they only get better with use. As the bearings wear-in, the balls actually make the races even smoother. So, when compared to other ceramic-hybrid bearings on the market that claim speed and power advantages on day one, Enduro XD-15 bearings not only provide the same initial advantages on day one, but will get even faster and smoother with time and use, while the other ceramic-hybrid options will only get slower.
Finding the right bottom bracket solution for the ever-growing range of bicycles on the market is not always an easy task. At Enduro we currently offer over 50 different types of bottom brackets for various bottom bracket shell and crankset combinations in multiple price/performance levels. Enduro bearings offers threaded options for BSA, BSA 30, Italian and the robust T47 system. For press-fit bottom brackets we created the oft-copied, thread-together Torqtite bottom brackets as well as press-fit Delrin Cup options. We even offer flanged, double-row bearings to fit 30mm cranksets in BB86 shells!
| Model | BKS6053, BKC0805 |
|---|
